You are browsing documentation for an older version. See the latest documentation here.

Gateway

When services need to receive traffic from the outside, commonly called North/South, the Kong Mesh Gateway enables routing network traffic from outside a Kong Mesh mesh to services inside the mesh. The gateway is also responsible for security at the entrance of the Mesh.

Kong Mesh Gateway deploys as a Kong Mesh Dataplane, that’s an instance of the kuma-dp process. Like all Kong Mesh Dataplanes, the Kong Mesh Gateway Dataplane manages an Envoy proxy process that does the actual network traffic proxying.

You can distinguish two types of gateways:

• delegated: Allows users to use any existing gateway like Kong.
• builtin: Configures the data plane proxy to expose external listeners to drive traffic inside the mesh.

Gateways exist within a mesh. If you have multiple meshes, each mesh requires its own gateway. You can easily connect your meshes together using cross-mesh gateways.

Below visualization shows the difference between delegated and builtin gateways:

Builtin with Kong Gateway to handle the inbound traffic:

Delegated with Kong Gateway:

The blue lines represent traffic not managed by Kong Mesh, which needs configuring in the Gateway.

Delegated

The Dataplane entity can operate in gateway mode. This way you can integrate Kong Mesh with existing API Gateways like Kong.

The gateway mode lets you skip exposing inbound listeners so it won’t be intercepting ingress traffic. When you use a data plane proxy with a service, both inbound traffic to a service and outbound traffic from the service flows through the proxy. In the gateway mode, you want inbound traffic to go directly to the gateway, otherwise, clients require dynamically generated certificates for communication between services within the mesh. The gateway itself should handle security at an entrance to the mesh.

Usage

apiVersion: apps/v1
kind: Deployment
metadata:
  ...
spec:
  template:
    metadata:
      annotations:
        kuma.io/gateway: enabled
      ...

kubectl get pods
NAME                                    READY   STATUS    RESTARTS   AGE
echo-5fc5b5bc84-zr9kl                   2/2     Running   0          41m
kong-1645186528-kong-648b9596c7-f2xfv   3/3     Running   2          40m

echo "
apiVersion: v1
kind: Service
metadata:
  name: echo-multizone
  namespace: default
spec:
  type: ExternalName
  externalName: echo.default.svc.80.mesh
" | kubectl apply -f -

echo "
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  name: demo-multizone
  namespace: default
spec:
  ingressClassName: kong
  rules:
    - http:
        paths:
          - path: /bar
            pathType: ImplementationSpecific
            backend:
              service:
                name: echo-multizone
                port:
                  number: 80
" | kubectl apply -f -

type: Dataplane
mesh: default
name: kong-01
networking:
  address: 10.0.0.1
  gateway:
    type: DELEGATED
    tags:
      kuma.io/service: kong
  outbound:
    - port: 33033
      tags:
        kuma.io/service: backend

Builtin

The builtin gateway is integrated into the core Kong Mesh control plane. You can configure gateway listeners and routes to service directly using Kong Mesh policies.

The builtin gateway is configured on a Dataplane:

type: Dataplane
mesh: default
name: gateway-instance-1
networking:
  address: 127.0.0.1
  gateway:
    type: BUILTIN
    tags:
      kuma.io/service: edge-gateway

A builtin gateway Dataplane does not have either inbound or outbound configuration.

To configure your gateway Kong Mesh has these resources:

• MeshGateway is used to configure listeners exposed by the gateway
• MeshGatewayRoute is used to configure route to route traffic from listeners to other services.

Kong Mesh gateways are configured with the Envoy best practices for edge proxies.

Usage

You can create and configure a gateway that listens for traffic from outside of your mesh and forwards it to the demo app frontend.

echo "
apiVersion: kuma.io/v1alpha1
kind: MeshGatewayInstance
metadata:
  name: edge-gateway
  namespace: default
spec:
  replicas: 1
  serviceType: LoadBalancer
  tags:
    kuma.io/service: edge-gateway
" | kubectl apply -f -

spec:
  replicas: 1
  serviceType: LoadBalancer
  tags:
    kuma.io/service: edge-gateway
  resources:
    limits: ...
    requests: ...
  serviceTemplate:
    metadata:
      annotations:
        service.beta.kubernetes.io/aws-load-balancer-internal: "true"
        ...
    spec:
      loadBalancerIP: ...
" | kubectl apply -f -

type: Dataplane
mesh: default
name: gateway-instance-1
networking:
  address: 127.0.0.1
  gateway:
    type: BUILTIN
    tags:
      kuma.io/service: edge-gateway

kuma-dp run \
  --cp-address=https://localhost:5678/ \
  --dns-enabled=false \
  --dataplane-token-file=kuma-token-gateway \ # this needs to be generated like for regular Dataplane
  --dataplane-file=my-gateway.yaml # the Dataplane resource described above

Now let’s create a MeshGateway to configure the listeners:

echo "
apiVersion: kuma.io/v1alpha1
kind: MeshGateway
mesh: default
metadata:
  name: edge-gateway
spec:
  selectors:
  - match:
      kuma.io/service: edge-gateway
  conf:
    listeners:
      - port: 8080
        protocol: HTTP
        hostname: foo.example.com
        tags:
          port: http/8080
" | kubectl apply -f -

type: MeshGateway
mesh: default
name: edge-gateway
selectors:
  - match:
      kuma.io/service: edge-gateway
conf:
  listeners:
    - port: 8080
      protocol: HTTP
      hostname: foo.example.com
      tags:
        port: http/8080

The MeshGateway creates a listener on port 8080 and will accept any traffic which has the Host header set to foo.example.com. Notice that listeners have tags like Dataplanes. This will be useful when binding routes to listeners.

These are Kong Mesh policies so if you are running on multi-zone they need to be created on the Global CP. See the dedicated section for using builtin gateways on multi-zone.

Now, you can define a MeshGatewayRoute to forward your traffic based on the matched URL path.

echo "
apiVersion: kuma.io/v1alpha1
kind: MeshGatewayRoute
mesh: default
metadata:
  name: edge-gateway-route
spec:
  selectors:
    - match:
        kuma.io/service: edge-gateway
        port: http/8080
  conf:
    http:
      rules:
        - matches:
            - path:
                match: PREFIX
                value: /
          backends:
            - destination:
                kuma.io/service: demo-app_kuma-demo_svc_5000
" | kubectl apply -f -

type: MeshGatewayRoute
mesh: default
name: edge-gateway-route
selectors:
  - match:
      kuma.io/service: edge-gateway
      port: http/8080
conf:
  http:
    rules:
      - matches:
          - path:
              match: PREFIX
              value: /
        backends:
          - destination:
              kuma.io/service: demo-app_kuma-demo_svc_5000

TCP

The builtin gateway also supports TCP MeshGatewayRoutes:

type: MeshGateway
mesh: default
name: edge-gateway
selectors:
  - match:
      kuma.io/service: edge-gateway
conf:
  listeners:
    - port: 8080
      protocol: TCP
      tags:
        port: tcp/8080
---
type: MeshGatewayRoute
mesh: default
name: edge-gateway-route
selectors:
  - match:
      kuma.io/service: edge-gateway
      port: tcp/8080
conf:
  tcp:
    rules:
      - backends:
          - destination:
              kuma.io/service: redis_kuma-demo_svc_6379

The TCP configuration only supports the backends key (no matches or filters). There are no TCP-generic ways to filter or match traffic so it can only load balance.

Multi-zone

The Kong Mesh Gateway resource types, MeshGateway and MeshGatewayRoute, are synced across zones by the Kong Mesh control plane. If you have a multi-zone deployment, follow existing Kong Mesh practice and create any Kong Mesh Gateway resources in the global control plane. Once these resources exist, you can provision serving capacity in the zones where it is needed by deploying builtin gateway Dataplanes (in Universal zones) or MeshGatewayInstances (Kubernetes zones).

See the multi-zone docs for a refresher.

Cross-mesh

The Mesh abstraction allows users to encapsulate and isolate services inside a kind of submesh with its own CA. With a cross-mesh MeshGateway, you can expose the services of one Mesh to other Meshes by defining an API with MeshGatewayRoutes. All traffic remains inside the Kong Mesh data plane protected by mTLS.

All meshes involved in cross-mesh communication must have mTLS enabled. To enable cross-mesh functionality for a MeshGateway listener, set the crossMesh property.

  ...
  mesh: default
  selectors:
    - match:
        kuma.io/service: cross-mesh-gateway
  conf:
    listeners:
      - port: 8080
        protocol: HTTP
        crossMesh: true
        hostname: default.mesh

Hostname

If the listener includes a hostname value, the cross-mesh listener will be reachable from all Meshes at this hostname and port. In this case, the URL http://default.mesh:8080.

Otherwise it will be reachable at the host: internal.<gateway-name>.<mesh-of-gateway-name>.mesh.

Without transparent proxy

If transparent proxy isn’t set up, you’ll have to add the listener explicitly as an outbound to your Dataplane objects if you want to access it:

  ...
  outbound
  - port: 8080
    tags:
      kuma.io/service: cross-mesh-gateway
      kuma.io/mesh: default

Limitations

Cross-mesh functionality isn’t supported across zones at the moment but will be in a future release.

The only protocol supported is HTTP. Like service to service traffic, all traffic to the gateway is protected with mTLS but appears to be HTTP traffic to the applications inside the mesh. In the future, this limitation may be relaxed.

There can be only one entry in selectors for a MeshGateway with crossMesh: true.

Policy support

Not all Kong Mesh policies are applicable to Kong Mesh Gateway (see table below). Kong Mesh connection policies are selected by matching the source and destination expressions against sets of Kong Mesh tags. In the case of Kong Mesh Gateway the source selector is always matched against the Gateway listener tags, and the destination expression is matched against the backend destination tags configured on a Gateway Route.

When a Gateway Route forwards traffic, it may weight the traffic across multiple services. In this case, matching the destination for a connection policy becomes ambiguous. Although the traffic is proxied to more than one distinct service, Kong Mesh can only configure the route with one connection policy. In this case, Kong Mesh employs some simple heuristics to choose the policy. If all the backend destinations refer to the same service, Kong Mesh will choose the oldest connection policy that has a matching destination service. However, if the backend destinations refer to different services, Kong Mesh will prefer a connection policy with a wildcard destination (i.e. where the destination service is *).

Kong Mesh may select different connection policies of the same type depending on the context. For example, when Kong Mesh configures an Envoy route, there may be multiple candidate policies (due to the traffic splitting across destination services), but when Kong Mesh configures an Envoy cluster there is usually only a single candidate (because clusters are defined to be a single service). This can result in situations where different policies (of the same type) are used for different parts of the Envoy configuration.

You can find in each policy’s dedicated information with regard to builtin gateway support.