You are browsing documentation for an older version. See the latest documentation here.

Migration to the new policies

Kong Mesh provides two set of policies to configure proxies. The original source/destination policies, while provided a lot of features, haven’t met users expectations in terms of flexibility and transparency. The new targetRef policies were designed to preserve what already worked well, and enhance the matching functionality and overall UX.

In this guide, we’re going to setup a demo with old policies and then perform a migration to the new policies.

Prerequisites

helm - a package manager for Kubernetes
kind - a tool for running local Kubernetes clusters
jq - a command-line JSON processor
jd - a command-line utility to visualise JSONPatch

Start Kubernetes cluster

Start a new Kubernetes cluster on your local machine by executing:

kind create cluster --name=mesh-zone

You can skip this step if you already have a Kubernetes cluster running. It can be a cluster running locally or in a public cloud like AWS EKS, GCP GKE, etc.

Install Kong Mesh

Install Kong Mesh control plane with skipMeshCreation set to true by executing:

helm repo add kong-mesh https://kong.github.io/kong-mesh-charts
helm repo update
helm install --create-namespace --namespace kong-mesh-system kong-mesh kong-mesh/kong-mesh --set "kuma.controlPlane.defaults.skipMeshCreation=true"

Make sure the list of meshes is empty:

kubectl get meshes

Expected output:

No resources found

Setup demo with old policies

In the first half of this guide we’re going to deploy a demo app in the default mesh and configure it using old policies.

Create `default` mesh

echo 'apiVersion: kuma.io/v1alpha1
kind: Mesh
metadata:
  name: default
spec:
  # for the purpose of this guide we want to setup mesh with old policies first,
  # that is why we are skipping the default policies creation
  skipCreatingInitialPolicies: ["*"] ' | kubectl apply -f-

Deploy demo application

Deploy the application

kubectl apply -f https://raw.githubusercontent.com/kumahq/kuma-counter-demo/master/demo.yaml
kubectl wait -n kuma-demo --for=condition=ready pod --selector=app=demo-app --timeout=90s

Port-forward the service to the namespace on port 5000:

kubectl port-forward svc/demo-app -n kuma-demo 5000:5000

In a browser, go to 127.0.0.1:5000 and increment the counter.

Enable mTLS and deploy TrafficPermissions

echo 'apiVersion: kuma.io/v1alpha1
kind: Mesh
metadata:
  name: default
spec:
  skipCreatingInitialPolicies: ["*"]
  mtls:
    enabledBackend: ca-1
    backends:
      - name: ca-1
        type: builtin' | kubectl apply -f-

echo 'apiVersion: kuma.io/v1alpha1
kind: TrafficPermission
mesh: default
metadata:
  name: app-to-redis
spec:
  sources:
    - match:
        kuma.io/service: demo-app_kuma-demo_svc_5000
  destinations:
    - match:
        kuma.io/service: redis_kuma-demo_svc_6379' | kubectl apply -f -

Deploy TrafficRoute

echo 'apiVersion: kuma.io/v1alpha1
kind: TrafficRoute
mesh: default
metadata:
  name: route-all-default
spec:
  sources:
    - match:
        kuma.io/service: "*"
  destinations:
    - match:
        kuma.io/service: "*"
  conf:
    destination:
      kuma.io/service: "*"' | kubectl apply -f-

Deploy Timeouts

echo 'apiVersion: kuma.io/v1alpha1
kind: Timeout
mesh: default
metadata:
  name: timeout-global
spec:
  sources:
    - match:
        kuma.io/service: "*"
  destinations:
    - match:
        kuma.io/service: "*"
  conf:
    connectTimeout: 21s
    tcp:
      idleTimeout: 22s
    http:
      idleTimeout: 22s
      requestTimeout: 23s
      streamIdleTimeout: 25s
      maxStreamDuration: 26s' | kubectl apply -f-

Deploy CircuitBreaker

echo 'apiVersion: kuma.io/v1alpha1
kind: CircuitBreaker
mesh: default
metadata:
  name: cb-global
spec:
  sources:
  - match:
      kuma.io/service: "*"
  destinations:
  - match:
      kuma.io/service: "*"
  conf:
    interval: 21s
    baseEjectionTime: 22s
    maxEjectionPercent: 23
    splitExternalAndLocalErrors: false
    thresholds:
      maxConnections: 24
      maxPendingRequests: 25
      maxRequests: 26
      maxRetries: 27
    detectors:
      totalErrors:
        consecutive: 28
      gatewayErrors:
        consecutive: 29
      localErrors:
        consecutive: 30
      standardDeviation:
        requestVolume: 31
        minimumHosts: 32
        factor: 1.33
      failure:
        requestVolume: 34
        minimumHosts: 35
        threshold: 36' | kubectl apply -f-

Migration steps

It’s time to migrate the demo app to the new policies.

Each type of policy can be migrated separately; for example, once we have completely finished with the Timeouts, we will proceed to the next policy type, CircuitBreakers. It’s possible to migrate all policies at once, but small portions are preferable as they’re easily reversible.

The generalized migration process roughly consists of 4 steps:

Create a new targetRef policy as a replacement for existing source/destination policy (do not forget about default policies that might not be stored in your source control). The corresponding new policy type can be found in the table. Deploy the policy in shadow mode to avoid any traffic disruptions.
Using Inspect API review the list of changes that are going to be created by the new policy.
Remove kuma.io/effect: shadow label so that policy is applied in a normal mode.
Observe metrics, traces and logs. If something goes wrong change policy’s mode back to shadow and return to the step 2. If everything is fine then remove the old policies.

The order of migrating policies generally doesn’t matter, except for the TrafficRoute policy, which should be the last one deleted when removing old policies. This is because many old policies, like Timeout and CircuitBreaker, depend on TrafficRoutes to function correctly.

TrafficPermission -> MeshTrafficPermission

Create a replacement policy for app-to-redis TrafficPermission and apply it with kuma.io/effect: shadow label:

echo 'apiVersion: kuma.io/v1alpha1
kind: MeshTrafficPermission
metadata:
  namespace: kong-mesh-system
  name: app-to-redis
  labels:
    kuma.io/mesh: default
    kuma.io/effect: shadow
spec:
  targetRef:
    kind: MeshService
    name: redis_kuma-demo_svc_6379
  from:
    - targetRef:
        kind: MeshSubset
        tags:
          kuma.io/service: demo-app_kuma-demo_svc_5000
      default:
        action: Allow' | kubectl apply -f -

Check the list of changes for the redis_kuma-demo_svc_6379 kuma.io/service in Envoy configuration using kumactl, jq and jd:

DATAPLANE_NAME=$(kumactl get dataplanes -ojson | jq '.items[] | select(.networking.inbound[0].tags["kuma.io/service"] == "redis_kuma-demo_svc_6379") | .name')
kumactl inspect dataplane ${DATAPLANE_NAME} --type=config --shadow --include=diff | jq '.diff' | jd -t patch2jd

Expected output:

@ ["type.googleapis.com/envoy.config.listener.v3.Listener","inbound:10.42.0.13:6379","filterChains","0","filters","0","typedConfig","rules","policies","allow-all-default"]
- {"permissions":[{"any":true}],"principals":[{"authenticated":{"principalName":{"exact":"spiffe://default/demo-app_kuma-demo_svc_5000"}}}]}
@ ["type.googleapis.com/envoy.config.listener.v3.Listener","inbound:10.42.0.13:6379","filterChains","0","filters","0","typedConfig","rules","policies","MeshTrafficPermission"]
+ {"permissions":[{"any":true}],"principals":[{"authenticated":{"principalName":{"exact":"spiffe://default/demo-app_kuma-demo_svc_5000"}}}]}

As we can see, the only difference is the policy name MeshTrafficPermission instead of allow-all-default. The value of the policy is the same.

Remove the kuma.io/effect: shadow label:
```
 kubectl label -n kuma-system meshtrafficpermission app-to-redis kuma.io/effect-
```
Even though the old TrafficPermission and the new MeshTrafficPermission are both in use, the new policy takes precedence, making the old one ineffective.
Check that the demo app behaves as expected. If everything goes well, we can safely remove TrafficPermissions:
```
kubectl delete trafficpermissions --all
```

Timeout -> MeshTimeout

Create a replacement policy for timeout-global Timeout and apply it with kuma.io/effect: shadow label:

echo 'apiVersion: kuma.io/v1alpha1
kind: MeshTimeout
metadata:
  namespace: kong-mesh-system
  name: timeout-global
  labels:
    kuma.io/mesh: default
    kuma.io/effect: shadow
spec:
  targetRef:
    kind: Mesh
  to:
  - targetRef:
      kind: Mesh
    default:
      connectionTimeout: 21s
      idleTimeout: 22s
      http:
        requestTimeout: 23s
        streamIdleTimeout: 25s
        maxStreamDuration: 26s
  from:
  - targetRef:
      kind: Mesh
    default:
      connectionTimeout: 10s
      idleTimeout: 2h
      http:
        requestTimeout: 0s
        streamIdleTimeout: 2h' | kubectl apply -f-

Check the list of changes for the redis_kuma-demo_svc_6379 kuma.io/service in Envoy configuration using kumactl, jq and jd:

kumactl inspect dataplane ${DATAPLANE_NAME} --type=config --shadow --include=diff | jq '.diff' | jd -t patch2jd

Expected output:

@ ["type.googleapis.com/envoy.config.cluster.v3.Cluster","demo-app_kuma-demo_svc_5000","typedExtensionProtocolOptions","envoy.extensions.upstreams.http.v3.HttpProtocolOptions","commonHttpProtocolOptions","maxConnectionDuration"]
+ "0s"
@ ["type.googleapis.com/envoy.config.listener.v3.Listener","outbound:10.43.146.6:5000","filterChains","0","filters","0","typedConfig","commonHttpProtocolOptions","idleTimeout"]
- "22s"
@ ["type.googleapis.com/envoy.config.listener.v3.Listener","outbound:10.43.146.6:5000","filterChains","0","filters","0","typedConfig","commonHttpProtocolOptions","idleTimeout"]
+ "0s"
@ ["type.googleapis.com/envoy.config.listener.v3.Listener","outbound:10.43.146.6:5000","filterChains","0","filters","0","typedConfig","routeConfig","virtualHosts","0","routes","0","route","idleTimeout"]
+ "25s"
@ ["type.googleapis.com/envoy.config.listener.v3.Listener","outbound:10.43.146.6:5000","filterChains","0","filters","0","typedConfig","requestHeadersTimeout"]
+ "0s"

Review the list and ensure the new MeshTimeout policy won’t change the important settings. The key differences between old and new timeout policies:

Previously, there was no way to specify requestHeadersTimeout, maxConnectionDuration and maxStreamDuration (on inbound). These timeouts were unset. With the new MeshTimeout policy we explicitly set them to 0s by default.
idleTimeout was configured both on the cluster and listener. MeshTimeout configures it only on the cluster.
route/idleTimeout is duplicated value of streamIdleTimeout but per-route. Previously we’ve set it only per-listener.

These 3 facts perfectly explain the list of changes we’re observing.

Remove the kuma.io/effect: shadow label.
```
kubectl label -n kuma-system meshtimeout timeout-global kuma.io/effect-
```
Even though the old Timeout and the new MeshTimeout are both in use, the new policy takes precedence, making the old one ineffective.
Check that the demo app behaves as expected. If everything goes well, we can safely remove Timeouts:
```
kubectl delete timeouts --all
```

CircuitBreaker -> MeshCircuitBreaker

Create a replacement policy for cb-global CircutBreaker and apply it with kuma.io/effect: shadow label:

echo 'apiVersion: kuma.io/v1alpha1
kind: MeshCircuitBreaker
metadata:
  namespace: kong-mesh-system
  name: cb-global
  labels:
    kuma.io/mesh: default
    kuma.io/effect: shadow
spec:
  targetRef:
    kind: Mesh
  to:
  - targetRef:
      kind: Mesh
    default:
      connectionLimits:
        maxConnections: 24
        maxPendingRequests: 25
        maxRequests: 26
        maxRetries: 27
      outlierDetection:
        interval: 21s
        baseEjectionTime: 22s
        maxEjectionPercent: 23
        splitExternalAndLocalErrors: false
        detectors:
          totalFailures:
            consecutive: 28
          gatewayFailures:
            consecutive: 29
          localOriginFailures:
            consecutive: 30
          successRate:
            requestVolume: 31
            minimumHosts: 32
            standardDeviationFactor: "1.33"
          failurePercentage:
            requestVolume: 34
            minimumHosts: 35
            threshold: 36' | kubectl apply -f-

Check the list of changes for the redis_kuma-demo_svc_6379 kuma.io/service in Envoy configuration using kumactl, jq and jd:
```
kumactl inspect dataplane ${DATAPLANE_NAME} --type=config --shadow --include=diff | jq '.diff' | jd -t patch2jd
```
The expected output is empty. CircuitBreaker and MeshCircuitBreaker configures Envoy in the exact similar way.
Remove the kuma.io/effect: shadow label.
```
kubectl label -n kuma-system meshcircuitbreaker cb-global kuma.io/effect-
```
Even though the old CircuitBreaker and the new MeshCircuitBreaker are both in use, the new policy takes precedence, making the old one ineffective.
Check that the demo app behaves as expected. If everything goes well, we can safely remove CircuitBreakers:
```
kubectl delete circuitbreakers --all
```

TrafficRoute -> MeshTCPRoute

It’s safe to simply remove route-all-default TrafficRoute. Traffic will flow through the system even if there are neither TrafficRoutes nor MeshTCPRoutes/MeshHTTPRoutes.

MeshGatewayRoute -> MeshHTTPRoute/MeshTCPRoute

The biggest change is that there are now 2 protocol specific routes, one for TCP and one for HTTP. MeshHTTPRoute always takes precedence over MeshTCPRoute if both exist.

Otherwise the high-level structure of the routes hasn’t changed, though there are a number of details to consider. Some enum values and some field structures were updated, largely to reflect Gateway API.

Please first read the MeshGatewayRoute docs, the MeshHTTPRoute docs and the MeshTCPRoute docs. Always refer to the spec to ensure your new resource is valid.

Note that MeshHTTPRoute has precedence over MeshGatewayRoute.

We’re going to start with a gateway and simple legacy MeshGatewayRoute, look at how to migrate MeshGatewayRoutes in general and then finish with migrating our example MeshGatewayRoute.

Let’s start with the following MeshGateway and MeshGatewayInstance:

echo "---
apiVersion: kuma.io/v1alpha1
kind: MeshGateway
mesh: default
metadata:
  name: demo-app
  labels:
    kuma.io/origin: zone
spec:
  conf:
    listeners:
    - port: 80
      protocol: HTTP
      tags:
        port: http-80
  selectors:
  - match:
      kuma.io/service: demo-app-gateway_kuma-demo_svc
---
apiVersion: kuma.io/v1alpha1
kind: MeshGatewayInstance
metadata:
  name: demo-app-gateway
  namespace: kuma-demo
spec:
  replicas: 1
  serviceType: LoadBalancer" | kubectl apply -f-

and the following initial MeshGatewayRoute:

echo "apiVersion: kuma.io/v1alpha1
kind: MeshGatewayRoute
mesh: default
metadata:
  name: demo-app-gateway
spec:
  conf:
   http:
    hostnames:
    - example.com
    rules:
    - matches:
      - path:
          match: PREFIX
          value: /
      backends:
      - destination:
          kuma.io/service: demo-app_kuma-demo_svc_5000
        weight: 1
  selectors:
  - match:
      kuma.io/service: demo-app-gateway_kuma-demo_svc" | kubectl apply -f-

Targeting

The main consideration is specifying which gateways are affected by the route. The most important change is that instead of solely using tags to select MeshGateway listeners, new routes target MeshGateways by name and optionally with tags for specific listeners.

So in our example:

spec:
  selectors:
    - match:
        kuma.io/service: demo-app-gateway_kuma-demo_svc
        port: http-80

becomes:

spec:
  targetRef:
    kind: MeshGateway
    name: demo-app
    tags:
      port: http-80
  to:

because we’re now using the name of the MeshGateway instead of the kuma.io/service it matches.

Spec

As with all new policies, the spec is now merged under a default field. MeshTCPRoute is very simple, so the rest of this is focused on MeshHTTPRoute.

Note that for MeshHTTPRoute the hostnames are directly under the to entry:

  conf:
    http:
      hostnames:
        - example.com
      # ...

becomes:

  to:
    - targetRef:
        kind: Mesh
      hostnames:
        - example.com
      # ...

Matching

Matching works the same as before. Remember that for MeshHTTPRoute that merging is done on a match basis. So it’s possible for one route to define filters and another backendRefs for a given match, and the resulting rule would both apply the filters and route to the backends.

Given two routes, one with:

  to:
      rules:
        - matches:
            - path:
                match: PathPrefix
                value: /
          default:
            filters:
              - type: RequestHeaderModifier
                requestHeaderModifier:
                  set:
                    - name: x-custom-header
                      value: xyz

and the other:

  to:
      rules:
        - matches:
            - path:
                match: PathPrefix
                value: /
          default:
            backendRefs:
              - kind: MeshService
                name: backend
                namespace: kuma-demo
                port: 3001

Traffic to / would have the x-custom-header added and be sent to the backend.

Filters

Every MeshGatewayRoute filter has an equivalent in MeshHTTPRoute. Consult the documentation for both resources to find out how each filter looks in MeshHTTPRoute.

Backends

Backends are similar except that instead of targeting with tags, the targetRef structure with kind: MeshService/kind: MeshServiceSubset is used.

Equivalent MeshHTTPRoute

So all in all we have:

Create the equivalent MeshHTTPRoute

echo "apiVersion: kuma.io/v1alpha1
kind: MeshHTTPRoute
metadata:
  name: demo-app
  namespace: kuma-system
  labels:
    kuma.io/origin: zone
    kuma.io/mesh: default
spec:
  targetRef:
    kind: MeshGateway
    name: demo-app
  to:
  - targetRef:
      kind: Mesh
    hostnames:
      - example.com
    rules:
    - default:
        backendRefs:
        - kind: MeshService
          name: demo-app_kuma-demo_svc_5000
      matches:
      - path:
          type: PathPrefix
          value: /" | kubectl apply -f -

Check that traffic is still working.
Delete the previous MeshGatewayRoute:
```
kubectl delete meshgatewayroute --all
```

Next steps

Further explore new policies

Migration to the new policies

Prerequisites

Start Kubernetes cluster

Install Kong Mesh

Setup demo with old policies

Create default mesh

Deploy demo application

Enable mTLS and deploy TrafficPermissions

Deploy TrafficRoute

Deploy Timeouts

Deploy CircuitBreaker

Migration steps

TrafficPermission -> MeshTrafficPermission

Timeout -> MeshTimeout

CircuitBreaker -> MeshCircuitBreaker

TrafficRoute -> MeshTCPRoute

MeshGatewayRoute -> MeshHTTPRoute/MeshTCPRoute

Targeting

Spec

Matching

Filters

Backends

Equivalent MeshHTTPRoute

Next steps

Create `default` mesh